• SET-50 SET-50 SET-50 SET-50

    详细信息

     品牌:TES华盛仪器  型号:SET-50  加工定制:是  
     测量范围:0.68KG  测量精度:0.01 ° 外形尺寸:20*25*80 mm 
     用途:五金  长度:80 mm 工作温度:25 ℃ 
     重量:1 ? 装箱数:1   

     


     

     


     

     

    利??y?器

    利??y?器是?品安全???y?的??д撸??前在全世界?造?I中?V泛使用,包括玩具、企?I??洹⑵???造商及家?等。因?樵?碓蕉嗳岁P注家居?品的安全使用,所以 Underwriter’s Laboratory (UL)??出??实?y??x器,去?y?各?不同消??品。

    美??ES华盛仪器公司是唯一利??y?器SET-50的原生?商。

    如您?注您的?品利?安全,?K使之符合(UL公司及消?品安全委?T??u?的)??H??剩??匦栀??利??y?器SET-50及?帽TC-3。

    利??y?器是非常容易使用及耐用。??ば卧O?,特?e?合放於手中,?巧?y?臂及完全密封式的?承,可?p少磨擦,加入新??弓?矸??新的UL公司力度要求,所有可移?拥牟糠菥?斜Wo?矸乐刮酃讣?p?摹?/p>

    利??y?器需配合?帽一起使用,而?帽是模彷人?手指厚度而??。

     

    ?格

    ???L??识?O?的?y?器。

    UL公司制定????Q定??猱a品的?利?程度(UL1439),???拭?槔???y?器。提供一??客?的??剩??Q定符合?有的安全要求。
    大部份UL??拾?ㄔ谙?M?品上的主要要求例如??、突出部份、角位、包??锲贰㈤_口、???、手把等等,?些部份都需要?A滑以不?е??Α?/p>

     

    · 

    ??

    方便易用和???/p>

    ?利的???y?器型?SET-50 由?合手型??的????C?そM成 (用Cycoloy 塑料?做, IBM ???C?ひ策x用同?硬牧涎u造)。特?包括一?l?小的手臂、被密封的?L珠?承?p少摩擦,?K且加入新??弓?矸??新的UL公司力度要求,所有可移?拥牟糠菥?斜Wo?矸乐刮酃讣?p?摹?/p>

    利??y?器型?SET-50 配合?帽TC-3使用。?成套工具包括42???帽,?帽上附有三??溆醚b配的磁?В?奖阍?y?的工具上滑行。

    ???磁??w帽符合U.L.三?源?У囊??
    一??M 泡?i材料??/16”厚
    一??M 泡?i材料??/32”厚
    表面一??榫鬯姆?蚁┐??/p>

    磁??z帽*有效率的用途是容易和迅速地?Χ???造?I?行?y?,?K且不用在?y?前在工具上安?三?硬煌?拇?АC看?y??用磁??z帽,在?酌腌??人?纯杀怀?ァ⒈槐嬲J和被替?Q,因而可在很短?r??冗M行更多的?y?。
    磁??z帽附的中心有1/16”的?示,?椭??查?T???y?中心?。

     

    操作

    ?品安全?y??奈词沁@容易

    1. 磁??w帽一直在利??y?器的?毫︻^以黑色?橹行木?和?色塑料?帽面的部份滑行。

    2. ?y??r,磁??[放在被?z查物件的??上。用手拿著?C?ぃ?聪麓?ь^?, 直到?y?臂及?C?ば纬芍本?。

    3. 沿??2英寸移??毫︻^再返回起?。然後由??撤出工具。???帽??之?的距???英寸。

    4. ?z查磁??w帽?定是否穿透??痈??鳌H绻?┩福?谏?拇????幌?p。利??y?器可接受的?利程度是不可穿透感??鞯耐饷??印?/p>

     

    ?於TES公司

     

    成立於1990年,是利??y?器及?帽套的原生?商

    一部份著名生?商已?使用华盛公司的利??y?器

    Amana Appliances
    Canon Corporation
    Coleman Products
    Eaton Corporation
    Electrolux
    Fujitsu
    General Electric
    Hamilton Beach/Procter Silex
    Hewlett-Packard
    Hot Point
    IBM
    La-Z-Boy
    Litton Corporation
    Mattel Maytag
    NEC America
    Nikon
    RCA
    Rheem
    Seksun Corporation
    Siemens Corporation
    Snapper
    Sunbeam
    Underwriters Laboratories
    Westbend Corporation
    Westinghouse
    Whirlpool
    Xerox

     

     

    English Version

     

     

    The Sharp Edge Tester is the leader in product safety equipment, currently in use worldwide by manufacturers of toys, home appliances, business equipment, automobile manufacturers, home appliances, every item used in the kitchen, and much more.

    With so much concern over the safety of products to be used in the home, Underwriter’s Laboratories has issued standards to test edge sharpness on a variety of consumer products.

    Technical Engineering Service (TES) is the original and only manufacturer of the Sharp Edge Tester Model SET-50.

    If you are concerned about the safety and sharpness of your product and want to meet international standards as set by UL and the Consumer Product Safety Commission, then you need to order the Sharp Edge Tester and Tape Cap Kit for use on your production line.

    The Sharp Edge Tester Model SET-50 is extremely easy to use and durable. It consists of a clam-shell type housing which fits into the palm of a hand. Features include a compact arm, sealed ball bearings to reduce friction, and a new spring to meet the latest Underwriter’s Laboratories force requirements. All moving mechanisms are protected against dirt and breakage. The Sharp Edge Tester is used with the available Tape Cap Kit which simulates the thickness of skin on the human finger.


    Specifications:

    This product was designed specifically for Underwiter’s Laboratories

    Underwriters Laboratories has released a “Standard for Determination of Sharpness of Edges of Electrical Equipment,” U.L. 1439. This standard calls for the use of the Sharp Edge Tester in order to provide an objective and uniform test method for determining compliance with an existing safety requirement.

    Most U.L. standards covering consumer products contain a subjective requirement such as “an edge, projection, or corner of an enclosure, opening, frame, guard, knob, handle, or the like, shall be smooth, well rounded, and not sufficiently sharp to constitute a hazard.”
    Based on recent publications, it is evident that the sharpness of edges on consumer products is important to many government agencies like the Consumer Product Safety Commission and the National Bureau of Standards. Comment from the industry — where thousands of Sharp Edge Testers are in use — favor the general design concepts of this U.L. chosen Sharp Edge Tester over all others.

    This model appeared in Production Magazine and in a technical paper of the “UL Sharp Edge Tester” #MR-77-469, published by the Society of Manufacturing Engineers.

    Note: If you have a new product to submit to ‘UL’ for approval. You must use this tool to test it’s EDGES. They will not approve your product without doing so.


    Design:

    Designed for Ease of Use and Longevity

    The Sharp Edge Tester Model SET-50 consists of a clam-shell type housing (made of Cycoloy plastic, the same material used to manufacture the housing of IBM computers) which fits into the palm of the hand. Features include a compact arm, sealed ball bearings to reduce friction, and a new spring to meet the latest Underwriter’s Laboratories force requirements. All moving mechanisms are protected against dirt and breakage.

    The Sharp Edge Tester Model SET-50 is used with the Tape Kit Model TC-3. This kit consists of 42 pieces each with three pre-assembled tapes on a plastic cap, which slips on to the tool for testing.
    This Tape Cap meets the U.L. requirements of three tapes:
    1 layer of 3M Scotch Foam, 1/16” thick,

    1 layer of 3M Scotch Foam, 1/32” thick,

    1 laver of skived Teflon Tape

    Use of the Tape Cap is the most efficient way for the inspector to easily and rapidly conduct multiple tests on the manufacturing line without having to install three different layers of tape on the tool prior to testing. Each time a test is performed with the Tape Cap, it can be removed, identified, and replaced within seconds; thus providing more tests in less time to facilitate inspection reports.

    The Tape Cap also features a 1/16” wide guide line which is on the center of the cap and helps the inspector performing the test to “center” the tape and the tool on the edge being tested.


    How to use:

    Product Safety Testing Has Never Been This Easy

    1. Slide the Tape Cap all the way on to the pressure head of the Sharp Edge Tester with the black center guide line and the uncovered portion of the red plastic cap facing up.

    2. Position the tape covered pressure head on the edge of the item to be checked for sharpness. Holding the clam shell base in your hand, press down on the tape covered head until the arm and the tool form a straight line.

    3. Move the pressure head two inches along the edge and then back again to the starting point. Then withdraw the tool from the edge. The total distance of engagement between the edge and the tape-covered head is therefore 4 inches.

    4. Examine the tape cap to determine whether or not penetration has occurred through the two-sensing layers. If penetration has occurred, the black indicating tape will be visible through the resulting cut. The application of the Sharp Edge Tester to an edge with acceptable sharpness will not result in the cutting through the two outer layers of the sensing tape.


    About TES:

    Technical Engineering Service is the original manufacturer of the Sharp Edge Tester and Tape Cap Kit. We have been manufacturing this product since 1973.

    Some of Companies which have used the Sharp Edge Tester:

    Amana Appliances
    Canon Corporation
    Coleman Products
    Eaton Corporation
    Electrolux
    Fujitsu
    General Electric
    Hamilton Beach/Procter Silex
    Hewlett-Packard
    Hot Point
    IBM
    La-Z-Boy
    Litton Corporation
    Mattel Maytag
    NEC America
    Nikon
    RCA
    Rheem
    Seksun Corporation
    Siemens Corporation
    Snapper
    Sunbeam
    Underwriters Laboratories
    Westbend Corporation
    Westinghouse
    Whirlpool
    Xerox


    Ordering Information


     

    SET-50 sharp edge tester plus TC-3 Tap Cap (includes 44 piece)

    HK$4,650 per set

    Buy It Now


    TC-3 Tape Cap (includes 44 piece)

    HK$1,800 per box

    Buy It Now

    Made in the USA

     

     

     

       买家在收到货时,请与货运公司人员当面验货再签收!请仔细检查配件是否齐全,外观有无损坏,特别是外观有无破损,如有损坏或是配件丢失,请您拒收,并立即联系东莞华盛公司协商处理!若您不验货检查就签收(例如签收后才发现外观损坏或配件丢失.恕本公司概不负责)造成的损失由买家自行承担(买家签收后本公司将视为产品完好到货)因本公司一直坚持薄利多销原则.还请大家多多配合.谢谢大家的理解和支持!

     

      

       华盛仪器有限公司是集研发、生产销售于一体的实验仪器*制造商。我公司*致力于研发、生产高品质的现代化实验设备,已通过了ISO9001/2000国际质量体系认证,公司拥有先进的生产及检测设备,并具有完善的计量及质量保证体系。
        公司主要产品有:玩具检测仪器类系列、环境试验箱类系列、电子测量仪器类系列、空气压缩机类系列、冷冻式干燥机类系列等基础实验室设备,并广泛应用于生物制药、卫生防疫、环境保护、农业科研等领域。我们本着以客户服务为导向,为客户提供实验室仪器及电子行业生产设备的整体解决方案和*化服务。我们的经营理念是“客户,以质量为本”,为目标市场提供一流的服务,使客户得到*大的增值,与客户建立长久、互赢、双赢的合作伙伴关系。
        华盛将一如既往,以实事求是、踏实苦干为根本;以国际先进水平为目标,不断攀登技术高峰;以市场为导向,不断把高质量的产品奉献给广大客户。

     

     

    联 系 人:游国林 先生

    电    话:

    移动

    地    址:中国 东莞市黄江镇西路三街18号

    邮    编:523750

    我公司已在全国各省市有自己的办事处及售后服务点!您购买我公司产品,我公司给您品质保障!
  • 留言

    询价产品:
    *(必填)
    联系人: *(必填)
    手    机: *(必填)
    电    话:
    E-mail:
    公    司: *(必填)
    地    址:
东莞市黄江华盛仪器经营部 地址: 中国广东省东莞市黄江镇西进路三巷18号 技术支持:网赌平台哪个信誉好 免责申明 管理员入口
内容声明:网赌平台哪个信誉好为第三方平台及互联网信息服务提供者,网赌平台哪个信誉好(含网站、客户端等)所展示的商品/服务的标题、价格、详情等信息内容系由店铺经营者发布,其真实性、准确性和合法性均由店铺经营者负责。网赌平台哪个信誉好提醒您购买商品/服务前注意谨慎核实,如您对商品/服务的标题、价格、详情等任何信息有任何疑问的,请在购买前通过网赌平台哪个信誉好与店铺经营者沟通确认;网赌平台哪个信誉好设备网上存在海量店铺,如您发现店铺内有任何违法/侵权信息,请在网赌平台哪个信誉好首页底栏投诉通道进行投诉。
通用
工程
化工
防腐
新能
市政
Copyright ©2003 - 2019 网赌平台哪个信誉好_十大老品牌网赌_十大可靠网赌平台 版权所有 关于我们 | 服务中心 | 著作权与商标声明 | 联系我们 | 会员服务 | 隐私声明 | 网站导航